Goose57
Active Member
Hi all, starting to wire up my glow plug harness on my Optimizer build I got from Quadstar. My 95’ factory harness has two fuseable links one for each side installed in the two large orange wires before they branch out to the eight blue wires going to theGP,s. And why does the left bank side glow plugs also get power to them from fuse block when key is in run?
Looking at the 95’ electrical diagram it also gets power from the battery wire on the glow plug controller when the key is in start or run. Or am I looking at this wrong. The electrical diagram also show a fuseable links in each of the eight glow wires. I didn’t see any on my stock harness unless it is in the blue wiring feeding each GP. Thanks guys.
Looking at the 95’ electrical diagram it also gets power from the battery wire on the glow plug controller when the key is in start or run. Or am I looking at this wrong. The electrical diagram also show a fuseable links in each of the eight glow wires. I didn’t see any on my stock harness unless it is in the blue wiring feeding each GP. Thanks guys.