ak diesel driver
6.5 driver
Seems like if you had a reflash designed around the extra fuel output of the 5068 that it would be best for overall power output.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
GL4 Chip
- Thread starter DieselSlug
- Start date
NVW
Well-Known Member
With stock programing and #6 resistor my GMTDScan showed 63.45 mm3 max fuel. With a #9 resistor it was a mind boggling 63.75 mm3 max fuel. I wouldn't bother with the #9 resistor. Leo
buddy
Active Member
Question wasnt mainly about resistors, but I think GMTDScan only shows you the commanded fuel rate from the PCM, at least thats what the GM service manual says. So changing resistor will only affect actual, not commanded. Adding a long extension will change resistance, potentially affecting injection pulse width and fuel rate.