Sunshine
Northern Lights
At last I've manage to remove the front rotors after using an electrical bolt heat that warms them up nearly white hot in an instant, welded new nuts on their heads but two of them I had to use a Dremel grinder plus drilling on those 4x15mm bolts....
I started to wonder what comes after Red loctite ..
I would like to know how I can remove the bearings as its a complete assembly rotor, hub,bearings & lugs all in one, not like the one in the DIY forum...
When replacing should I use a Blue loctite or copper paste...
Thank you in advance....
I started to wonder what comes after Red loctite ..
I would like to know how I can remove the bearings as its a complete assembly rotor, hub,bearings & lugs all in one, not like the one in the DIY forum...
When replacing should I use a Blue loctite or copper paste...
Thank you in advance....