Big T
Well-Known Member
I went to install a new door lock pin on the ‘94 Suburban. Undid the pin and the backing plate dropped down into the door pillar. Shouldn’t that plate be spot welded in place?
I was able to fish the plate out with a mechanic’s magnet. I’ve got it mostly held in place with a pair of needle nose vice grips. Waiting for a 2nd set of hands (son) to thread in the pin from the other side of the door. Should be less than 5 minute job.
I was able to fish the plate out with a mechanic’s magnet. I’ve got it mostly held in place with a pair of needle nose vice grips. Waiting for a 2nd set of hands (son) to thread in the pin from the other side of the door. Should be less than 5 minute job.