ak diesel driver
6.5 driver
I'm under the impression that the only difference is the torque converter ie stall speed anything else I need to know. Found a brand new 4l80e on craigslist that was bought from a dealer and is still in the crate $900.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Difference between a gas and diesel 4l80e
- Thread starter ak diesel driver
- Start date
midniteplowboyy
Recruit
I think there the same, just 2x4 and 4x4 versions and updates over the years. IIRC the 454 ran the same converter, which makes sense because they both build peak torque around the same rpm.
I'd buy it, thats a good deal.
I'd buy it, thats a good deal.
Missy Good Wench
Wild Blonde from Cloud Mt
Thats about it.
Even the converter may be the same as the one used on the 7.4L 8.0L (454 & 502)
There have been a bunch of updates including the revision of the connector plug on the side (electrical) and the oil cooler line locations.
Early ones were like a 400 and later ones had the return line at the rear.
MGW
Even the converter may be the same as the one used on the 7.4L 8.0L (454 & 502)
There have been a bunch of updates including the revision of the connector plug on the side (electrical) and the oil cooler line locations.
Early ones were like a 400 and later ones had the return line at the rear.
MGW