CTS and glows?

[ghitch75]

this is on the 95...when it's at temp(195) should the glow plugs cycle?

so what i'm asking does the CTS tell the ECM to shut them off?


my mech. 93 don't come on after it's up to temp...

 

[chrisk1500]

Yes they should still cycle....albeit quickly....

 

[ghitch75]

it cycles the same time about a 10 count....down to 30f then at cold it goes for about a 15 count then 10 count when warm....does that sound right?

 

[chrisk1500]

When up to temp, shut off the truck and ohm out the ECT sensor...

177 ohms @ 212 deg. F. or 100 deg. C.
241 ohms @ 194 deg. F. or 90 deg. C.
332 ohms @ 176 deg. F. or 80 deg. C.
467 ohms @ 158 deg. F. or 70 deg. C.
667 ohms @ 140 deg. F. or 60 deg. C.
973 ohms @ 122 deg. F. or 50 deg. C.
1188 ohms @ 113 deg. F. or45 deg. C.
1459 ohms @ 104 deg. F. or 40 deg. C.
1802 ohms @ 95 deg. F. or 35 deg. C.
2238 ohms @ 86 deg. F. or 30 deg. C.
2796 ohms @ 77 deg. F. or 25 deg. C.
3520 ohms @ 68 deg. F. or 20 deg. C.
4450 ohms @ 59 deg. F. or 15 deg. C.
5670 ohms @ 50 deg. F. or 10 deg. C.
7280 ohms @ 41 deg. F. or 5 deg. C.
9420 ohms @ 32 deg. F. or 0 deg. C.
12300 ohms @ 23 deg. F. or -5 deg. C.
16180 ohms @ 14 deg. F. or -10 deg. C.
21450 ohms @ 5 deg. F. or -15 deg. C.
28680 ohms @ -4 deg. F. or -20 deg. C.
52700 ohms @ -22 deg. F. or -30 deg. C.
100700 ohms @ -40 deg. F. or - 40 deg. C

 

[ghitch75]

ok i'll give that a shot..thanks

 

[kojo]

here is picture of "glov map" on original 95model chip:
http://kojo.wippiespace.com/images/kaaviot/hehkukartta.jpg
Sorry for language, those words are in finnish, but lampo=temp and sekkaa=seconds
So glow time depends on voltage and ect.