• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Correct flush procedure for 96 k2500 suburban6.5

turbopower6

Member
Messages
55
Reaction score
26
Location
Fort Washington PA
Any one have any back flushing tips in vehicle with rear heat. How do you get the tap water completely out before refilling with distiller water and dexcool?
 
Some people with RV's buy a fitting for using compressed air to blow out their water lines, Others like me use RV plumbing antifreeze. You could buy the adapter and rig it up to use compressed air to blow water out. When I flushed my rad I found out the total coolant amounts and then dumped straight antifreeze into the rad and added some water to get the proper ratio. For me it was not necessary to blow or drain the water in the heater. I never did use distilled water, Our water is pretty good here, Better be they just built a billion dollar filtration plant.
 
Back
Top