matuva
Tropical 6.5er
My father in law is modding his cooling circuit.
He opened the rear port on each head and connect them to the extra plug at the waterpump.
If I'm correct, this extra plug is in the inlet circuit of the waterpump, so IMO, he is "sucking" water from the heads rather than injecting water in it.
Also, I pretend he is not right as the hose and inlets are 1/2". Too wide I think, and that should disrupt the flow.
We spent hours in discussing about that and we still disagree.
No matter if I'm right or wrong, in fact I'm afraid he is doing wrong things and will crack a head or worse---
His other theory is that we can connect the hose from rear ports to the hose coming from the surge tank
He says that this hose is connected to the inlet circuit and so this should work.
Any idea?
He opened the rear port on each head and connect them to the extra plug at the waterpump.
If I'm correct, this extra plug is in the inlet circuit of the waterpump, so IMO, he is "sucking" water from the heads rather than injecting water in it.
Also, I pretend he is not right as the hose and inlets are 1/2". Too wide I think, and that should disrupt the flow.
We spent hours in discussing about that and we still disagree.
No matter if I'm right or wrong, in fact I'm afraid he is doing wrong things and will crack a head or worse---
His other theory is that we can connect the hose from rear ports to the hose coming from the surge tank
He says that this hose is connected to the inlet circuit and so this should work.
Any idea?