Congratulations to dmaxfireman!!!!!!

[CtChevy427]

Congratulations go out to Kyle for two first place pulls last night at the Durham Fairgrounds. I think they need a bigger sled......

 

[BoostN]

Congrats!

Any videos?

 

[GmcLbz]

Congrats bud!:thumbsup:

 

[dmaxfireman]

Walked 'em like they were standin still


http://www.youtube.com/watch?v=co4GdKspgOI

http://www.youtube.com/watch?v=FXvm16J-PtY

http://www.youtube.com/watch?v=T7yxxO2_mtI

http://www.youtube.com/watch?v=WsUNRJTsllA

http://www.youtube.com/watch?v=er7YV3YVll4

 

[BoostN]

Good looking videos, could use some more fuel.

 

[dmaxfireman]

more fuel = bent rods

i'm going for 650 and 11's on stock rods as a daily driver

but as always i have a new item in the works that i am going to be testing on my new motor that will hopefully give me some more fuel on the top end always got something up my sleeve for a little bit more umph

 

[dmaxfireman]

the last time i ran that tune on the dyno i was pushing upwards of 540hp when i popped a IC boot (and i have since seat of pants tuned it)..... and i still had not gotten above 2800 rpm.

my peak power in the tunes prior was in the area of 3600rpm so that tune should be at least 540+

 

[CtChevy427]

Here was the competition in the open class..........):h A full pull was 225 feet..

http://www.youtube.com/watch?v=yt2TdBePoZ8

 

[dmaxfireman]

http://www.youtube.com/watch?v=24kn-8mhCgY

this was my competition in the 8000 class....