bckslyr2003
New Member
ok i have a question about cloning the t-case speed sensor because my 95 4l80e has no rear tone ring my question is do speed sensors have a polarity or will it mater what wire goes to what wire they use 2 wires ??
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
cloning speed sensor ?????? 4l80e with no rear tone ring
- Thread starter bckslyr2003
- Start date
bckslyr2003
New Member
So when i split the tcase vss it won't matter what 2 wires go to the toss connector correct.
- Staff
- #4
That still doesn't fix your valve body issue. Ignore that and you'll crack some apply pistons inside the trans. You need to either pull the trans and fix it right, or rewire it to run a 95 prom. And I hope you addressed the tbi before you score a piston skirt.