Non Typical
Roller of the Smoke
Found this place following the A-Team turbo thread.
I always enjoy finding diesel sites that give support and info.
My current truck is a 93 6.5T that is pushing 250,000 miles.
The most I have towed with it is 16,000 lbs.
I have a build engine that is going into the shop for testing and cleaning.
My goal is to turn my truck into kinda a show truck. To that end I am aiming for 300RWHP, and whatever torque follows that.
The plan is
Forged crank and girdle
Mahle Rods and 18:1 pistons
Supporting head assembly
ARP Head Studs
Ported intake and exhaust
Customized intake
True Marine Injectors
DB-4 IP
W/M injection to start
I/C
HX-40
4" Downpipe
Dual T-Stats and Hi-Flow Water Pump
Biggest Rad I can fit up front
I hope I can get some good info and opinions off this site as I build the truck.
I always enjoy finding diesel sites that give support and info.
My current truck is a 93 6.5T that is pushing 250,000 miles.
The most I have towed with it is 16,000 lbs.
I have a build engine that is going into the shop for testing and cleaning.
My goal is to turn my truck into kinda a show truck. To that end I am aiming for 300RWHP, and whatever torque follows that.
The plan is
Forged crank and girdle
Mahle Rods and 18:1 pistons
Supporting head assembly
ARP Head Studs
Ported intake and exhaust
Customized intake
True Marine Injectors
DB-4 IP
W/M injection to start
I/C
HX-40
4" Downpipe
Dual T-Stats and Hi-Flow Water Pump
Biggest Rad I can fit up front
I hope I can get some good info and opinions off this site as I build the truck.