• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Can the Hmmr 6.2 intake Man fit a 6.5?

Drago

Drago

Active Member
Messages
618
Reaction score
196
Location
Virginia
My 1995 Nat Asp OBD1 intake manifold needs to come off to repair cracked hoses, it has an EGR port, can I replace it with a 6.2, non EGR intake manifold?
 
Drago said:
My 1995 Nat Asp OBD1 intake manifold needs to come off to repair cracked hoses, it has an EGR port, can I replace it with a 6.2, non EGR intake manifold?
Click to expand...

If interested I have one thats actually a 6.5 manifold. You can tell its a 6.5 because it has the mounting bosses for the FFM. Mine is sandblasted and powdercoated (like new).
$80

1046.jpg1045.jpg
 
very, let me get the bucks, this is my son's truck, still in my name for admin reasons but the maint cost and fuel is his responsibility.
 
OK, got the manifold on the floor and found my fuel leak, son is getting new hoses, clamps and gaskets, just waiting for my LeroyD manifold
 
PMed for email address. Will mail tomorrow after payment :)
Got pics of the swap job so far?
 
WooHooo just got the Manifold, bolted right in, Butt Dyno says everything is good to go. No drone and I think it's breathing better, feel better that I'm not recircing dirty exhaust back thru my motor
 
I'm convinced performance has improved, I don't hear that "I need air" sound that the V8 gassers make.
 
That shiny red looks good surrounded by the black covers and air filter housing. I'd like to spend some of your extra spending money and see that coolant crossover and thermostat housing turn shiny red also.
 
My son said it was a bit more responsive, I guess that big obstruction in the middle of the intake and the carbon buildup was choking the shat out of it.
 
Yeah, drop a 4" exhaust and watch the difference. You think it's better flowing in good, wait till it can flow out good. Just helped a friend get his into his 99.
 
You must log in or register to reply here.
Back
Top