• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Anyone willing to lend out or sell, via PayPal, a working Diesel compression tester?

WarWagon

WarWagon

Well it hits on 7 of 8...
Messages
10,689
Reaction score
8,460
Location
AZ
Need to see what head(s) I have to pull on Patch via a compression test. I hope to get away with just the driver side due to headstuds installed with red threadlocker.

Something along the lines of :
Kent Moore SPX Compression Gauge J-6692-B and Adapter J-26999-30
 
You want a compression tester right not a leak down tester correct! I have a leak down tester but I don't think they work right, I put it on a good 12v Cummins and air blew out past both valves and the rings as soon as I put pressure to the cylinder with both rockers off the valves.
 
Yea, I would say your on the right track with a compression test. Sorry, if I had one I'd send it your way.
 
You must log in or register to reply here.
Back
Top