preachermic
New Member
Where can I get one that is the right size? The one on mine is for a gasser.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Alternator Pulley
- Thread starter preachermic
- Start date
Odlaw
Redneck
I finally gave up trying to find the right one from the stealerships and local parts houses....they all told me the same thing. "your best bet is going to be to check with Aamac"(local alternator/starter repair shop). I went there and he had one, took my brand new alternator and swapped it out for me - no charge. He said he would just trade me the larger pulley for the one that was on mine.
One thing I didn't try was to ask who the supplier was for the reman alt I got from the Zone...you could try to contact them.
Good luck!
One thing I didn't try was to ask who the supplier was for the reman alt I got from the Zone...you could try to contact them.
Good luck!
packratt
Active Member
Bet you a dollar the chuckle head behind the counter would tell you Durlast was the manufacturer.
packratt
Active Member
Check with your local junk yards. Doing a search on Car-Parts.com shows an alt near you in shelby.
JMJNet
Recruit
Have you tried google to find alt/starter shop in your area or in cyberspace? also at the bay. You still need to know the size though.