(AGAIN) S.O.S in belgium

[chrissuburban]

hi every body,
Now my suburban start and drive very good.
But i can't drive on the way because here in belgium the warrning ant flashing must be orange and separate brake light.
I thought naively that by separating wire it would be ok.:nonod:.
Now,
front ; i left de flashing in the corner only
behind; i put flashing wire in the reverse space whith orange bulb and i added a reverse lamps under the rear bumper.

PROBLEM.

When i flashes front go to fast like when 1 bulb is dead.
and behind, when i brake my flashing switch on while here the stop light must be red.

QUESTION ?

How or Where can i séparate stop and flashing light and for front how can i do for put the flashing in corner only and leave the twoo other for headlight???:mad2:

thanks and sorry for my english.

 

[racer55]

This might help some?
http://www.nls.net/mp/volks/htm/signals.htm

 

[whatnot]

The easiest way to do it would be run wires from the front lights to the rear signals. Then put a diode in series with each brake light wire and tie both sides together. Only problem doing it this way is the hazards will probably flash red too.