Cali6.5
Member
I bought a 92 cab to replace my 94 with heavy roof damage. I was playing with the dash removal and got to the instrument cluster. It comes out very easy as the electrical quick connect plug stays attached to the dash. It has a clip on each side that gets depressed and allows it to come out towards the front. The problem is the flanges that stick out of the plastic connector on the outside of the dash don't allow the connector to go in only out and the connector is hard wired to the rest of the harness, no other connectors behind. How do i get the connector to go through the dash to finish the dash remova:mad2:l?