SnowDrift
Ultra Conservative. ULTRA!
With what did you strip them?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
1996 K2500 “Krovvy”
- Thread starter n8in8or
- Start date
n8in8or
I never met a project I didn’t like
I just used some 4-1/2” paint and rust stripping wheels on my angle grinder.
I then cleaned them with some degreaser. Once dry, I sprayed them with self-etching primer. Top coat is semi gloss Rustoleum.
As an Amazon Associate we earn from qualifying purchases.
n8in8or
I never met a project I didn’t like
Last night the truck left the property for the first time in 5 years.
My brother did an alignment today. The numbers look good. He played with the camber to compensate for road crown and said it drives down the road really nice. “Really tight” he called it….it better with all the new parts and the quality of the parts!
I also hit the carwash with it on the way home tonight. It needs some more cleaning in a few spots, but overall it’s not looking bad.
My brother did an alignment today. The numbers look good. He played with the camber to compensate for road crown and said it drives down the road really nice. “Really tight” he called it….it better with all the new parts and the quality of the parts!
I also hit the carwash with it on the way home tonight. It needs some more cleaning in a few spots, but overall it’s not looking bad.
n8in8or
I never met a project I didn’t like
The truck was delivered to my dad’s house today. Now he just needs to insure and register it.
There’s a local car show on May 6th he’s planning to take it to, so he’ll have to get that stuff done before then.
There’s a local car show on May 6th he’s planning to take it to, so he’ll have to get that stuff done before then.
ak diesel driver
6.5 driver
NICE!!
SnowDrift
Ultra Conservative. ULTRA!
Nice ride.
I missed this part earlier when I asked about the spacers. I apologize for the redundancy.
I missed this part earlier when I asked about the spacers. I apologize for the redundancy.
n8in8or
I never met a project I didn’t like
No worries, we've all had those moments, it certainly wasn't worth blasting you over
