i remember you mentioning that. The problem i have is that parts are not avaible my side of the country.I have to get parts from sydney or melbourne {5000kms} or from the us.Very annoying i wasted 1 1/2 weeks looking for the problem
guys problem solved after replacing 3pmd and 1 ext harness we have a go and normal start no smoke normal revs i might get sued for this but amazon is on my shit list big time.guys all your replys and suggestions to solve this problem was really gratefully recieved thank you big time
when i start the engine cold i always wait for the glow plugs to go through the cycle.do any of you guys know what the volteges etc should be at the connecter that goes into the PMD . mine shows A green 0 volts B red 0 volts C black ground 001omhs D pink 12v E red 5v F ground to ip checked...
gday thanks for your reply.the little bit off start gas i used was enough to start motor and run by itself. as the motor warmed up the white (diesel smelling) smoke disappeared.when i pushed acelerater to floor very slight increase in revs but heaps of white smoke. motor idleing normally 700rpm...
We have a start of sorts.i used small amount of starting gas and it running. Still huge clouds of white smoke and no revs.decided to let it idle and warm up as the engine warmed the white smoke went away.as soon as pushed gas pedal down slight increase in revs but lots of white smoke again would...
gday mate there was some damege to the connecter ihave fixed that.Would the pins still make good contact?the ground was cleaned and refitted.it was starting and running fine except it was doing the pmd thing stopping and then having to wait before it would start again' thanks for your reply
gday guys im from west australia. i recently bought a 2000 holden 2500 suburban 6.5 turbo aussie badged suburban i have a list of small problems which i hope to solve over the coming months. im very impressed with vehicule.in aussie slang terms its built like a brick shit house.im setting up to...