What are the details on the shocks and air springs? Torsion bars are removed? What dia wheels are those? Must be big as it makes the rotors look small.
Maybe you were thinking of the gmt400 3500HD, they had 19.5 wheels and 10 lug rear and the front hubs omitted every other lug so it was 5 lug in front. Like a P30 bread truck chassis.
Hello, So is it correct that using 01-06 knuckles that we do need to get a 10 degree reamer for the ball joint holes and also need a 7 degree reamer for the tie rod holes if going to ES409 tie rod ends? Thanks.
Ok im in on this now. Picked up an 02 2500 rear to go into my 95 2500 7.4 4wd.
A couple months ago I removed tossed and bypassed the inop abs unit because it was causing the front brakes to drag. I pulled the vac booster and installed a 95 3500 hydroboost and master cyl, and plumbed in an...
Tesla seem to have a problem where after a wreck the doors (electric controlled and actuated) wont open and the battery catches fire and occupants cant get out.
Ref: a rear end out of a 88-98 2wd 6 lug C2500 - they are set up for a basically 0 offset wheel so If you put a 99-07 silverado1500 wheel on them it ends up looking really bad because the wheel is so sunk into the wheelwell.
I drove a 93 2wd 6 lug 2500 for about 10 years with custom 1.25...
I took my 95 K2500 abs unit (inop) off yesterday and tossed it. In process of making up brake lines and adj prop valve installation.
Since we cant buy a new or rebuilt one anyway. It was causing my front brakes to drag, must have some kind of restriction.