• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. N

    Intermittant Starting Issues

    Thanks BT and special thanks to WarWagon. Your advice was invaluable in correcting this problem. It has been 1 week and a little of 1000 miles and there have been no starting issues. It seems the leaking water sensor at the fuel filter, though was very slow, was just enough to allow an air...
  2. N

    Intermittant Starting Issues

    The 33960 filter I installed is made by wix but labeled as store brand. It is a metal can filter
  3. N

    Intermittant Starting Issues

    So today I installed a new fuel filter. Not the 33005 because it did not fit as I was told but went with the 33960. After I re-primed the system I found the water sensor unit was leaking. Could not get it to stop so I replaced the sensor. Primed the system again and no leaks. I suspect that you...
  4. N

    Intermittant Starting Issues

    Because the part numbers were the same or similar I guessed the NAPA filters were made by Wix. I did a little research and the Wix 33005 is one of the few 2 micron filters that I could find.
  5. N

    Intermittant Starting Issues

    It does not have a lift pump. I have purchased a new fuel filter Wix number 33005.
  6. N

    Intermittant Starting Issues

    It currently has a NAPA metal spin on filter #3005. There are no codes or warning lights
  7. N

    Intermittant Starting Issues

    I am finally the proud owner of a Duramax. 01 2500HD Crew LB 185k miles. I love this truck! The problem is that sometimes the truck dies about 5 seconds after starting (as if it ran out of fuel) and it refuses to restart. I opened the bleeder plug at the filter and could see fuel and when I...
Back
Top