Search results

Thanks for your input. Greatly appreciated. I will do more research on what you and others have advised for needs in which I want to accomplish. Live in the Olympia, Washington area if you know of any good and reliable service shops in northwest. Again thanks. Jim

If I want to add more HP/Torque what added items would I need. I was thinking of a re-manufactured engine with upgrades. But my tranny seems solid except for c2 and c3 likely burnt since I been throwing Po735 codes, so would a rebiult be better? Seems a remanufactured would be better as your...

Although this "old" truck has issues, the injectors were all replaced before we bought it, maybe 100 yds. of travel. As for the head gasket issue, it to was resolved at same time. Truck came with cold intake filter along with upgraded exhaust. Also on it is the puck system trailer hitch, full...

Here's the deal. Took truck in to have it scoped because I have recently been having the tranny go into limp mode last year three or four times throwing a Po735 code (5th gear ratio). When scanned it showed only that code. I was told the tranny needs to be overhauled, which I expected and...

Marty, Thanks for answering back and Merry Christmas. It will pull 15,500 stock, which I am better suited with aftermarket to pull a bit more and not willing to pull the guts out of it. My question was more in line of full time rving pulling that amount of weight (16,000#) six to eight months...

I am looking at full time rv'ing and was wondering if my 2001 lb7 3500 CC L/B Duallie pull up to 16,000#. Have a Superchip, Mbrp dual exhaust 4" w/5" tips, Afe cold intake, firestone air ride, prodigy trailer brake. Please chime in and do let me know your options or advice on any other...

Leak is not coming from the OEM filter, it is coming in the location of the added filter under the truck behind the driver door. I have been under looking and I can not see anything dripping, yet there is full on the ground. Checked all the fittings and no sign of leaks. Also I drove around...

Ok, problem. Replaced OEM filter (Racor) and now I have a fuel leak after driving around for 150 miles after putting in a secondary BD remote filter under the truck. Still able to drive around so I am not losing prime so I am thinking in may be a return line. Any ideas to locate this problem...

Jeff, Went with the Donaldson as it came with the BD Remote Fuel Filter setup (Ebay for $89.65). Pending on which is easier to purchase I could also go with the Cat 1R-0749 as we have a Cat dealership on the way to my moms about 50 miles away. They seem to do the same job. I should be...

Installed NEW additional fuel filter under the bed of the truck. Had a problem not able to keep truck started as it would start then depleted the fuel in the line and in new filter and run out of fuel. Seemed logical I was having a air leak from the cp3 not able to replenish fuel in filter(s)...

By adding a secondary fuel filter w/ 2 micron, put stress on the cp3 or do I NEED to add a lift pump at this time. Not heavy towing at this time. Or am I just over reacting?

Secondary fuel filter and thanks for getting back with me so soon. I have the racor filter that is a 4 micron/water separator now and will likely keep since it seems to do a great job (little pricey, if you have a suggestion for as good or better and cheaper let me know) and new filter...

Question i have do i put water separater filter first as primary or low micron (Donaldson 2 micron) filter first as is suggested for this setup. Thanks in advance for any help. Jim