Search results

Chain loose ?

Center plunger no longer in use. IDK if it is really required on the reinstallation of the IP and components.

Bolts from oil pan upwards all removed .

The tail pipe extension can be moved inwards or outwards and it changes sound pitch of the exhaust.

When I had the live gauge installed into the cab, running the facet impulse pump and then later the Carter pump that Leroy was selling I had no problem with with the cheap mechanical gauge. Went through several fuel pumps but then read warnings about bursting, breaking fuel lines so removed the...

@dbrannon79 I have your contact info and addy in my phoney.

I have four valve spring compressors. Three was in the shed and one on the garage wall. Two in the shed was missing the valve retainer attachments and had other parts missing. The one on the chair is the one I’ll mail to You tomorrow. It has the valve spring retainer arms attached but not the...

Let me look in the shed. I might have a spare valve spring compressor that I’ll send over and You can have it. IIRC, the adjustment wheel may be missing. I’ll go look.

A pretty car it is too. Thank You for sharing, upon Your infirmation, seems a good one to put on the avoidance list. One time, a V6 Audi in the pissant, oooops, passant. BILs car, cam shaft seal leaks. That shore makes a horrible noise when them chain tensioners dont pump up quick enough, makes...

The better style of valve stem/guide seals. https://a.co/d/05JGAGE5

The guides can be knurled then reamed to the proper size. Works great long as the valve stems are not wore down too bad.

No, this portion of Your statement from that previous posting. the truck moved so I can get the pretty car in the garage before this new storm hits in a couple of hours. We would like to see what that pretty car looks like. 😹😹😹

I have a lower intake with an upper intake bolt hole busted out. I will, someday, get out the aluminum arc rod that I use, and the oxy/acetylene torch, knock off a fair amount of the flux from the rod and play with building that bolt flange back out then drilling and tapping new threads through...

This new pretty car statement.

Take it to a maw and pop body shop. Old timers knows the fine points of hinge adjustments.

If You have a DC ark welder, get some aluminum arc rod and do some practicing. https://ramweldingsupply.com/p/harris-aluminum-arc-electrode-per-lb/

I have the opportunity to purchase two 6.5 lower intake manifolds for $80.00 each.located near 50 miles to the west. I messaged the people but then had to back out due to one of the cats needing some vetting. If anyone is interested I can pick them up then postage them off to you. Probably cant...

I was give a case W9 loader. Engine was seized. Pulled injectors, knocker loose into each cylinder. It tirned over a 1/4 turn after about a week. Its a four cylinder. Valve stems is rusted into the guides. I got back to work and never had a chance to finish getting the hood removed(cab and fuel...

And so, with one new faulty injector, it is a good plan to test every injector before installation, YES ? ? ? ?

@MarvinWoodie Welcome to thetruckstop. I know I’m a bit late but I’m curious if You got Your alternator wiring figured out.