Search results

I don't say it is but you could have an injector that has poor atomization at idle but working fine with higher RPM's. Older John Deere, Belarus and the GM two stroke diesels are notorious for having black soothy diesel running down the exhaust stack with prolonged idle, it is the nature of the...

Bad injector

Here is pics The 45 degree angle is from a 6.2(1/4" male x 1/8" female pipe,..the inverted angle is 6.5 (1/4" x 1/4" pipe)

What he says. Stock gauges are notoriously unreliable.

Common mistake i am sometimes still guilty of, same as not having all the zerks in line on a drive shaft. chit happens ;)

These fittings are inverted angle, not to be found any were. Matuva do as trailrider suggest,..get a short 1/8" grease hose and pull the OPS out of hiding but if you insists on staying stock i have couple of these fittings in the useless parts bin waiting for that unlikely special occasion...

Monthly bank statement tells me what is left in the account. I do the books once a year with Quicken come tax time,..Wife wants nothing to with it,..neither do i but if i don't it won't get done at all :nonod:

I get that easy with my GM 8 too, and I'am sitting at 2000+ feet elevation

So how important is it to have a damper unit installed in the transmission when changing from a dual mass flywheel to a 1 piece flywheel in this 94 dually?? My 95 2500 HD did not have a damper unit and it had a 1 piece flywheel.

So what is that stuff,..birds,..mice or is it what used to be an LP?? Fuel hoses look a little weathered too

Got my friends 94 dually here with clutch problems Got everything removed, T- case tranny, bell housing etc Has a dual mass flywheel,..it came apart and a whole pile of ball bearings got stuck between the flywheel and the clutch plate which explains the non working clutch.(it wrecked the...

I guess it's your lucky day today I just happened to remove a bracket 1/2 hr ago from a truck i'm in the process of changing the clutch on center 11 mm hole to edge of corner 1 3/8" 8 mm bolt center to edge of corner 5/8". The lip bottoms out against the bell housing to prevent the bracket...

Wrecking yard may have one or otherwise it ain't so hard to Fab one.