Search results

What load range are the tires? It sounds like they are D rated.

Check your tq wrench. It's possible your over torquing them without even knowing it. Do you retorque them after a few miles? Where are you buying the new studs from? Possible china junk? I can see this happening 1 time for you but not multiple times. On side note how far did the tire...

I just discovered a better idea than the loose lug nut trick, which has never failed me. I used a dent puller, found the right piece to fit inside the wheel opening and 2 slide bangs and it came off like butter. This was aluminum wheels on an 07 Chevy. I wrapped a little tape around the edges of...

I take the bolts out of the box and wiggle it until my puller fits on. I have a nice snap on puller that's slim and fits right in there http://buy1.snapon.com/catalog/item.asp?P65=&tool=hand&item_ID=10316&group_ID=1245&store=snapon-store&dir=catalog

I did my oil cooler lines before i did the solid axle swap and it was a pain. I dropped the front diff and it was much easier.

16inch drums? Those are ****in huge and not on a 1 ton truck

My take is the only thing you gain from using the u bolts is the ease of changing them out when they break. With the bolts you may end up with one stuck in the threads, with a u bolt you could just push the piece out.

What year truck did it come out of? Could be a 10bolt as GM used them in the 3/4 ton 4x4 trucks right up to the IFS changeover. They started in 79-80 depending on model and availablity

www.ruffstuffspecialties.com www.ballisticfabrication.com www.diy4x.com www.bluetorchfab.com i think any of these places will sell you a set. I have done business with all of them over the years and they all are good

Yes it doesn't go off at idle it only goes off after a full throttle run

I think the ATT just needs more air than the filter and housing can deliver. It seems every time I pop the hood to check the oil the filter guage is tripped showing it needs replacement. The filter is a new Wix filter, maybe 3 months old. I hate oil filters but I need something better.