Search results

Thanks that clears that up

is it possible that a bad tps be the cause

i have a 95 that I am working on that has a very touchy throttle as well. I have had it in the garage for a few days for other problems but I did find a broken ground wire so I will take it for a drive tomorrow and see if the broken ground was the problem

After finding this thread i realized that some one replaced the plug to the alternator and the pins where in the wrong place. Took plug apart and moved to correct spot and tach works like it should http://www.thetruckstop.us/forum/index.php?threads/32998/ Sent from my SM-G930V using Tapatalk

The tach does nothing never tries to move from whatbi remember these are ran off the alt i happened to have a spare off a 95 that i tried and it dosent do any thing either. Can i check for a signal voltage coming from the plug on the alt to try and see if i have bad wires or the gauge its self...

Two good batteries seems to have been the missing part to my puzzle. Seems strange that it would crank over but the glows wouldn't work Sent from my SM-G930V using Tapatalk

What's strange is that there is no power to the fuse at all but the fuse is good Sent from my SM-G930V using Tapatalk

The batteries are not very good i will try a different set out of my truck. I didn't use a meter but test light shows voltage at controler Sent from my SM-G930V using Tapatalk

I do but This is obd1. I did flash the codes and had a code for gp circuit relay fault and that is why i changed it Sent from my SM-G930V using Tapatalk

The fuse is good and they are Napa parts. All other fuses are good Sent from my SM-G930V using Tapatalk

Im working on a 95 for a friend that the gp dont cycle as they should. I checked all the gp and replaced 2 that where question able. Replaced coolant temp sensor in crossover, and replaced gp relay, and they still dont work. All grounds seem tight going to try and clean a couple up better. Im...

Thanks I'll check that first I know both of the rear ones went bad and I replaced them didnt know you could clean them Sent from my SM-G900V using Tapatalk

Our suburban is having some issues it started very intermittent but has gotten worse lately. It has the digital dual zone climate control and sometimes the driver side will blow hot and the passenger will be cold with both set on 60. Today both are blowing hot with it set on 60. I'm thinking...

Where did you get the sensor and I'm guess you sourced the mirror from junk yard Sent from my SM-G900V using Tapatalk

Do any of you guys run lighter oil in the cold months of the year? never have but need to change oil and was wondering about it

Well its been a while since I updated you guys on the project but I got the floor poured back on Halloween and was out of town the next weekend but this last weekend I got the sheeting all replaced and the windows that Im not going to have sheeted over, I found a used 8x18 garage door on...

I never did anything with this proiject as my current garage project has been occupying my time, but at some point I will get back to it

I have rubber expasion joint to go between the wall and floor

Sorry haven't been able to post for a while but last Saturday we got the building moved in and set on the walls and anchored down. wasn't able to get much done this weekend due to my daughters first birthday party, but did get the dirt work done and the sub grade set. need to get a few more...

Well I'm using wedge anchors because I thought trying to set the building down onto bolts would be way too difficult