Search results

Thanks did not think about searching it that way

Help! I need to replace the brakes on my 2000 k3500 it used to be a dually so it has the heavy duty calipers. I was reading around the other day and someone mentioned about upgrading to newer rotors to not have to mess with taking off the wheel bearings next time. My rotors need replaced but I...

The other weird thing about it i s that when you come to a stoplight it will stutter a couple times but as long as I hold my foot on the brake the Idle evens out. Seems to have good lift pump pressure. I can open the water drain with truck running and it still runs. Another odd thing is...

All right fellas this truck didn't do this all winter long and now it started doing it again. I put the clear tube on and no air bubbles to be seen, seems to be something electronic because it's very intermittent one time you start the truck no troubles the next time runs like crap any more ideas

I guess first thing I need to do is hook the wires up to the factory wiring and see what is going on. Can you use a jumper to power the lp from the ops plug on the 96+ trucks the same as on the older ones?

So is lp controlled by the ecm then? Also I figured out what the mystery part is. Found a number on it so I googled it and it's part of the airbag system

that's interesting. I guess I just figure that was the case since the lp is wired to power out of the fuse panel under the hood by one of the previous owners, they did put an inline fuse. I wonder why they would have cut the wires and wired it hot?

What is this that Is on the frame rail near the LP found some broken wires but honestly have no idea what this is for.

side note what got me to this thread, just spent 20 min looking and feeling around on back of my 96 looking for OPS (my other engines are pre 96 even in my 00). Did not remember that some are under the intake, did a search and here I am. I need to replace mine since it wont run the lift pump...

I had very similar results from my ffb from walking j must have bought that 8 years ago and when I swapped that engine into different truck it was in bad shape.

That's what I was thinking was the spot but couldn't remember for sure

So who wants to save me the digging since I can't remember where the best place to put the clear line to check for air

Yeah I haven't had any truck problems to speak of and with two little kids and house projects I've been staying busy. the few small problems I have had I've learned enough over the years from here to be able to fix on my own

here is the link 96 chevy 6.5td rough idle

well I haven't been around In a while I thought we used to be able to ill give the youtube a go

im not sure why I cant upload the videos

Computer wouldn't upland so tried to use phone says doesn't have allowed extension

My 96 does this very randomly. Did it about 2 weeks ago and haven't had any issues since until today. Have a new pmd that has been relocated and the grounds are all good. Seems to me that it is more than likely something in the pump but thought I would see what the group thinks. Only has issues...

Well it actually makes a worse noise when it becomes a 2 peice crank. I got one kicking around in the shed Sent from my Pixel 2 using Tapatalk

I did check it last night seems fine guess ill have to pick one up wasnt sure if there was any adjustments on them Sent from my SM-G930V using Tapatalk