Search results

Got my B&W installed this weekend, shitty instructions IMO but Sunday I think I got it done in hour maybe a little after disassembling the whole thing. Granted that was after spending 4-5 hours on it on Saturday, I spent alot of time trying to figure out why the hell the back crossmember wasnt...

It is going to very from tire to tire honestly. I've seen some 235 rub and others have half an inch. I was running 245's on my dually and everyone said those would rub but they never came close. Cooper Discover ATR's should fit 235's or 245's anything wider you'll for sure need a spacer.

I'd say just put some plugs in the ports and get rid of the bastards.

Im under the belief that is only if you are towing a trailer weighing more than 10,000 # for commercial purposes. I dont see anything on the DOT site to lead me to beleive otherwise, I would guess the cop was retarded and didnt know the law himself, however I may be wrong, although I have a CDL...

Looking real good those 03+ grilles are in a category all alone. Whats next now?

I love them and would never considering buying any fourwheeler but a Polaris. And dont buy any of those stories from the other guys about wet belts, it doesent happen, and if it does it wasnt sealed right in the first place, I've had water up nearly to the intake for 20-30 minuetes once when I...

I had air get into my brake system if you didnt I would concentrate of chasing down other problems.

Just tossing this out there but i had the same problem with my 98 I've never found out what caused it for sure, but have done research on it, what problem you may have is you need to bleed your brakes properly, you can change your own brakes so I'm assuming you know how to bleed brakes, but from...

I guess another reason I'm glad I'll be buying one of these next week instead of a cheaper knock-off

Well I was able to find out today that the BOSS hitch is not for me, as it is not a turnove ball, the ball goes in 1 way and does not flip over and leave it flush, you can seperately purchase a plastic plug to cover up the hole, but that seems awfully tacky to me, and I've been told that the...

I've found them on ebay for $340 or so shipped as well, but have found the BOSS's for $220 shipped. I think I'll go with the prodigy also all the trucks at work have them and I'm used to them, and I guess its kinda cheesy to mount a 15 year old brake controller in a essentially new truck):h

Well I need to add a gooseneck to my truck its getting old using my uncles f-250 everytime I need a trailer and having somthing break on that truck, especially since its not my truck and I have a truck pertfectly capable of pulling a load, I was researching B&W's and trying to find a place that...

for that price I'd be way way ahead to just take off the intake manifold and give it to an experienced tig welder.

I hated aftermarket bumpers because they were to big and gawdy, this one is just about right good work

First I've ever heard of them, kinda neat, but there still missing that beautiful v-8 rumble.

You dont think you'll have a problem with those filters? My experience has been that they were waxed over, not just clogged with gelled up fuel.

My fuel gelled up in WI when the ambient tempature dropped to -27 degrees, GM sure didnt make them fuel filters fun to change in an emergancy, I limped it around for a day until the temps came up to the positive single digits.

Thats an impressive feat, I remember my old 6.5 -18 without the wind chill one day, fired right up on the first glow plug cycle I couldnt beleive it. That was right after I changed the oil though ran Rotella synthetic, but after 1000 miles of driving the oil would get thick enough that it...

That is only a tiny bit true as Fuji Heavy Industries is the company that provides the some engines for Polaris ATV's and snowmobiles. But Polaris also has its own Liberty engine line that produces most of the twin cylinder motors that the company is so well known for. But in the end they are...

Just get ahole of anyone who sells aftermarket diesel stuff, most of the shops that do work and sell stuff will have what you need. Haisley Machine is just 1 example.