Search results

Yep, you can set it for 3 / 5 /10 minutes loops. If it senses an Impact (has G-Sensor) it automatically saves the data and won't write over it. 32gb is the largest it'll accept.

Was at Costco today and saw Garmin now makes a Dashcam. Was $225, and was pretty pissed when I saw it because Garmin makes some really good stuff. I was about to buy it just based on knowing Garmin makes good stuff, so it's gotta be better than the $50 Cam I got, right? Well I got home and did...

Well, HE BLEW IT UP!! Dunno exactly what he did, but the truck has been sitting for about a month / month and a half, and all he does is refer to it as the "Broke Race Truck".

Nice!! Thanks :)

Just got this guy after reading all the reviews on it. It's the Model G1W...there is a newer Model out call the G1WH which has a 140* Viewing Angle. I've been using my GoPro's in my Trucks, but the Battery doesn't last that long. It's packed with features and is just as good, if not better...

Moved to Suspension Section.

Just be happy you don't have to deal with Chrysler's CAN-BUS System.

Loose Solder joint or cut in the Ribbon Cable?

Forgot that, it has a 58v FICM.

So my buddy got a 6.0 a few months ago (I know, I tried to steer him away) and it's been good until now. When his custom "Looney Tune" is loaded, it's now having trouble starting in the mornings when it's been sitting all night. It'll either not start at all, take a while to start but then...

Fixed it. Is there is Filter Spacer that is supposed to be there?

Here's what they show on their Site for a 4L80-E Filter: http://mag-hytec.com/store/index.php?main_page=product_info&cPath=15&products_id=69 Is yours the same Height as the one they show? Overall height 4.615"

http://www.amazon.com/dp/B000Q6QWSC/?tag=jhuntlink-20 Yep, you take off the Filler Cap on the Brake Rezzie, get out as much old Fluid as you can (Turkey Baster or whatever method you wanna use), top the Rezzie off with New Fluid, Screw on the Motive Adapter, and pump it up to about 15psi, then...

Welcome to the Site! Nice Truck.

I have a MityVac as well, and while it does a good job, I don't like it because it pulls Air around the Bleeder Threads while you are Extracting the Fluid, so you will never really know if there is Air still in the Lines or you're just pulling Air from around the Bleeder Threads. So I got the...

Russell makes Braided Lines for our Trucks. Get the Motive Power Bleeder.

The only difference I can find between the Zone 6" and BDS 7" (Zone is made by BDS) is that the BDS 7" is an NTBD Kit and it has 1 more Skid Plate. Other than that, they are identical.

Funny thing is the Tires are 35x13's It's a Zone 6" Lift, but everyone Swears it's more like a 7-8".

Yea, and the fact that it still doesn't Rub with it Dropped now, I'll keep it that way. I measured it VS the Cummins last evening too, and the Tire to Fender Gap is 3/4" or less between the 2, with the Duramax being the Taller one, and the Tailgate is 2" Higher when Down on the Duramax. All the...

Lift is still fully in the Truck, just Adjusted a little bit ;) 5" Lift Springs in the Rear, now with 3" Drop Shackles. Removed Green Keys in the Front, Installed OE Keys, and Adjusted them to whatever they needed to be at to be Even with the Rear. ...and nope, even with it Cranked...