Search results

ok have appointment at local shop at 10:00 tomorrow to throw scan tool on and time for me so last thing i can think of

help guys! replaced pump got running last night, took it for spin around block, went to bed, this morning took son to school started hard like lack of fuel but after third crank with some peddle started but same blue-white cloud till it got warm, got back to it today started very hard seeming to...

ok just replaced IP will keep u guys informed all i did was start and drive about a mile so will update on progress in next few days

just replaced my injection pump minutes ago, yes heat flange takes some pulling, I took me 5 hours total, replacing valve cover gaskets so i had to remove injector lines completely, but no problem, easy, good luck

Im sure you have all seen this but powerservice is # 10, stanadyne is #8, trying to get best for buck, cooking oil is fairly cheep but I do see the clouding issue no doubt there In Order Of Performance: 1) 2% REG SoyPower biodiesel HFRR 221, 415 micron improvement. 50:1 ratio of baseline fuel...

Ive been toying with the idea of using soybean oil as a additive to help lubrication due to our low sulfur fuel, any draw backs known of, and what would be acceptable ratio, and was also reading of adding acetone 2oz per 10 gal to get better mpg, any thoughts? and can both be added together?

just curious did any of this help power?

just seemed to be good price, for a rebuild, got any suggestions, seems alot of people rag on the ebay bunch, im all for a good deal but i also know you get what u pay for, hit me with some options, im not gonna choke the new price too much!!

by the way Brooklyn tow I used to to for a job, and had My own tow truck and business, loved it, was the most fun I ever had in a job!!! was always the hero, good fun

ok, ran for a day with stepper off saw no difference at all, plugged it back in and same deal hard start and smoke, so just to make my life easy Im gonna replace whole IP seems like more money but It solves lots of problems at once there seems to be many issues with this IP and I have no history...

ok, ran for a day with stepper off saw no difference at all, plugged it back in and same deal hard start and smoke, so just to make my life easy Im gonna replace whole IP seems like more money but It solves lots of problems at once there seems to be many issues with this IP and I have no history...

under cab

electric lift pump on frame under can for 6.5td, I had a 82 with 6.2it had a mechanical and I added a electric to help and to add easy of priming , or occasually I run out having no functioning fuel gauge lol, I ran it with a toggle switch and used it on hard pulls and start ups, also a manual...

never checked timing, but never changed it from before head job and never had a issue before, but cts and stepper did sperate things when unplugged, so at this point I talk stepper plug off start and then plug back on after 5 minutes just not sure if replacing would fix online found it at s&s...

metric 15mm bolt head attaches it to manifold

started this morning, without stepper motor advance plugged in bam fired up no smoke no ruff idle im thinking its the bad unit can the vehicle be ran without it?

ok been working on it guys I found one of my "new" injectors was barely leaking between top and bottom, didn't fix but surely helped, so trying to start does it same thing start die so I unplug cts fires up so watching exhaust I plug it in bam white smoke runs rough pull smooths out no white...

this is so crazy I'm having same identical problem new heads new gaskets starts hard dies about two three times also helps to add throttle I'm on same page thinking its fuel shut off synolid, I removed the optical filter didnt seem to be any different, good luck I'll be in touch if I find cure...

no water in fuel, not ac delco cts but pull it off runs up idle put it on idle falls only few weeks old but orilleys generic,removed optical filter sensor, lp is running great haven't measured pressure but its enough if cracked will spray all over motor, so im not thinking that, Im curious if...

throttle seems ok just adds more smoke to neighborhood I live in a condo so im the black sheep of the neighborhood lol Ill pull plunger tomorrow and see Im at a loss it ran perfect before I did the head job and perfect last week, cant see that ip would go just like that, but who knows but after...