Search results

I'm in the same boat. At this rate the truck won't ever be done. Pulled the pan off the motor I built to check on it since it's sat for a couple years now. My truck is a CCLB 4x4. Originally I wanted to center mount the turbo. Now I'm contending with doing a straight axle swap up front...

I'll have to get some stuff out and take a look at what I have. Been a while since I touched my 6.5 stuff, I did get my truck and motor to the same spot tho yesterday. I know for sure I have a 8' or 10' stick of stainless tube for this. Also I do remember being able to get wrenches in up there...

Why not just do a 1/2" straight stainless tube and use an elbow? No bending required then...

Possible the exhaust manifolds are a problem? Wtf do you mean it's only a possibility? Helen Keller could spot that one... I've been planning on building a center mount setup for some time but been too busy with work the last couple years. I went with the delta regrind but almost would like to...

Still for sale? I have to talk to my machinist and see if he'd wanna put up With this change to my build tho

Just wondering who's good for building pumps in this power range. I've been reading up on this DB2831-5722 but haven't seen much for stock power numbers or how to come about getting one... Any help would be appreciated Thanks, Joe

Bump! Got any status updates on this littleboy?

Updates man! Updates!!!!????

Just a bench racin' :popcorn:

How about a cam card?

Hmmmmmm interesting. I have a muy bien welder co. Welder at home that may be worth trying with this just to see what happens...30ft remote pull line or better of course though haha

Yea but for $140 seriously? Dude it can help build boost faster and lower egts. And if you guys are already doing the centermount setup on it, every little bit helps you know? I'm working on a grind right now...

Well Clearwater cylinder heads is where I got my last set from and it was like $600 or so for them. I think there's cheaper ones out there possibly. Those Chinese knockoffs all come from the same place so it shouldn't matter as you'll have to take those heads to a machine shop to ensure the head...

Not true man. A cam can always help. Don't tell me you're one of those guys who says porting heads won't help either lol

Hey man you should just call Delta camshafts to get a cam for $140ish w/o core or $90ish with core. Paying $600 for cam and spring kit is not worth it IMO. Delta is a respected company and lots of members here have used them. I also have the part numbers for ARP studs for mains/heads/etc.

Oh no worries. I have a remote mount WIX filter base and will be getting another soon. There are 4, 1/2" pipe thread inlets on this base so from the tank I will run 1/2" with a filter before the raptor pump I have and then have another wix base up front where the FFM used to be and have one in...

Yea but me and red were there for navscoleod... Dude Hurlburt has a nice brand new hotel put up called the Soundside Inn. I learned about that after staying at the Eglin one a couple times. Anchor Inn was getting redone when I left and then they were gonna put up a new dorm altogether for...

Oh man I remember those crappy little houses from Eglin when I was there lol

I want to make one out an I beam and box it in, handrail tubing, and industrial grating. Should be a deer killer for sure lol. I'm gonna make a DMI style rear just as soon as I get dimensions to get stuff cut out on the burn table at work... Definitely interesting idea you have here though, I...

You can make up for it with the cost of cheaper filters... Plus the way I'm going I'll have my sensors in place anyhow...