Search results

the next step is replacing the plugs and wires. He ordered a cold air intake and still looking for a chip though.

Haha my radio has been acting funny at times. If this this goes could it make the truck stall out.

Whitch is the IP filter harness. The one by the optical sensor. How will the truck run without it.

Not sure what PO means but the EGR have been there for years.

The vacuum pump is still there. I am going to fix the conection at the Solinoid and block the line to stop the code.

I did unplug the EGR solinoid because there is a loose conection there and then i blocked the EGR while I was at it. There is three EGR codes that always come up that im not worried about. Also the other codes dont come back only when the truck acts up. As soon as it stalls it trips all...

Well I dont know how to explain this but I will try my best. I drove to my buddies house and when I got here I checked my codes again. There was none other than the EGR ones that I will get till I get the chip. The truck has been stalling in that exact same way before I bought it from my...

Well I cant hook a scanner up tonight but I dont get what these codes mean. DTC 17 - High Resolution Circuit Fault DTC 19 - Crankshaft Position Reference Error DTC 18 - Pump Cam Reference Pulse Error DTC 35 - Injection Pulse Width Error (Time Short) DTC 36 - Injection Pulse Width...

I am trting to get a hold of a guy around here with a scanner so I will get him to reset it. I want to know what they are and his scanner will tell him.

This has been a bad day for me today. Yesterday my truck shut of on me a few times and it was a bitch to start. Anyway It cleared up so I drove home and it did the same thing again. I was driving down the road and it just shut off so I started It and it jerked around but kept running. 10 sec...

I tried that but the Carb is different. The one on my sled pump fuel in it dosent have a float bowl on it even like the 74.

Did you take the downpipe off to do your glowplugs?

Thanks. Havent been able to find one around town here so thats one of my few option.

All those sites are good. They have everything for this sled except a carb kit. I will try and call some of them tomorrow see if I cant order one in.

would anybody no a good place to get a carb kit for a 1972 Arctic Cat Panther 340.

Check your fuses or look under the dash to make sure you didnt accidently unplug any wires

What could have happened was the conact for the temp gauge got pushed in to far. If you ever have a chance try pulling it back some and moving the contacts down. Just a thought.

16 and do it all the time. Couldve sloshed fuel out your filler neck to. I have heard of that happening.

I made the mistake of buying wellman hi heats. They still work OK but from what i read on here there no good. Will put duratems in in summer for sure.

Never heard of that. On my dads old 96 350 we cut the cathelic converters out and it was fine. My dad dosent care about power so would you loose fuel millage if you cut them out. The truck gets about 12 MPG so something needs to be done. Also he wants a chip to increase his economy. I looked...