Search results

There also is thick grade 8 washers too. Might be less prone to breakage.

Check in www.classicindustries.com I remember seeing those in their site. I ordered side windows with the motor/regulators included and their products I received were most excellent quality.

Yup, now I know mire about them than I did before. 😹😹😹

I still dont know the meaning of that. Guess I’ll do a search.

Welcome to the truckstop. The 2000 Chevy and GMC one ton CC units still referred to as a GMT400. I dont know about the other one ton models. 😹😹😹

I still cant understand why it would be labeled a 10* reamer if it is actually a 7* reamer. 🤷😹 I just dont get it. 10* should be 10* no matter the distance. A mountain grade sign says the highway is at a 7% grade, it dont say 7% in 250 feets, its 7% the entire length except a short stretch at...

Here is the ones thats pictured. https://a.co/d/iwbMBW6

https://a.co/d/2AE3Fjj Is some, I’ll check my notes for more.

I always thought a 10 degree taper was just that, 10 degrees. But maybe I get the meaning. 10 degrees on 3/4 of an inch might be a steeper slope than 10 degrees on a two foot slope. 🤷

Next thing to check is the length of the rod from the hydroboost to the master cylinder. Step son bought vac boost/master cylinder set to convert his 67 chevy truck to power brakes. He screwed with that for two or three days then finally calls Me. I go over and adjust the pedal to booster rod...

5-W40 Rotella T6 os good fir those temps. Whats the temperature gauge tell You when those cold temps hit ? If temp gauge is getting at or near normal operating range then do nothing. If installing any kind of a cover over the grill/radiator, be sure that the vent opening is centered to the fan...

IDK whats available in Nevada or Arizona. I took the clutch, TO bearing and fly wheel for the 1959 Dodge Power Wagon to this company in Billings. https://clutchmasters.com/ft-2434-faq.html They asked questions, the main question was, will You be in situations where You might be riding the clutch...

Never herd of it afore.

I think I’ll get at least one of those for on the shelf. Very first sign of slack on the precision unit and it will be off. Now I’ll most likely be checking ball joints at every oil change. Lowers are original and has no slack whatsoever.

What brand ball joints did You install ? ? ? ? Now we should check the ball joints about every six months and see which brand wears the quickest. 🤷😹

Chinkachinesium ball joint.

No. Only parts store that was open on Friday was Oryllies and they had Precision and some other unheard of brand. I had previously used Precision brand U-Joints and those held up for many years so I had them get in the Precision brand. I hope these are as good as the U-Joint i installed years...

New ball joint hath arrivedeth. Remembered to route the hose and wire on the proper journey. And back together. The Chiltons book says torque for those small #8 10.9 nuts with 1.25 thread is 52 ft. Lbs. no way. Looked at my list of torque charts and it tells me that max tirque for that bolt...

Yes they was, uhhhh, is, was. Well, now one will be and one will be bolted on. 🤷😹😹😹