Search results

Not sure I can prove that it's related to the injector replacement, because I don't have a long history with the truck. It could have been leaking into the oil before the injectors were replaced. Are there any tests to determine where the coolant is getting in? It could be a head or intake...

Ok I need help from the throbbing brain that makes up DTR. I've owned this truck for about 9 months. This past May I had all the injectors replaced under warranty. They changed the oil and filter when they did the injectors. I just changed the oil last week and sent it in to the lab and the...

I have used Flitz metal polish for this as well. It works great!

Bump!

Anyone know if the 06 dvd console will work with my 03? I'm pretty sure I will need to buy the cable that connects to the stereo, but I want to make sure they are compatible. I have the Bose/GM stereo. The part number of this unit is 15233648. Thanks!

:cheers2:Thanks guys I think I'll leave it disconnected.

I changed my fuel filter this past weekend and the wire finally gave out. I could not get a new sensor on the weekend so I just plugged it back in figuring I would get a light teliing me there was water in the fuel. No light came on. Anyone no how that switch works? Does the float raise up...

I ran my truck out of fuel recently and to get it going I changed the filter and primed until there was no bubbles in the fuel. To get it started I had to prime while my wife cranked it over. Try having someone prime it while you crank it.

Bump!:arf:

Does anyone have a design for 8 to 10 lug adapters? I'm considering puting a set of 22.5" Alcoa's on my truck. I have access to a machining center and I thought it would be interesting to create them myself. They run anywhere from $650 to $900 all over the web. Maybe someone has done this...

Go to Wally mart and buy there 400W power inverter..... http://www.walmart.com/search/search-ng.do?search_constraint=0&search_query=inverter&ic=48_0

Welcome! Both my brothers drive Fords so were like family:biggrin5:

OK I'm in! Can't wait to smoke! I did a brake stand in front of the house the other day and burned the some big dually marks in the pavement:hurray: Probably won't do that to often, since rebuilding the trans can be a tad expensive):h Member list: #1 WhtTndr3 #2 mytmousemalibu #3 MattZ71...

Sorry for highjacking.... Has anyone cut out the muffler on the stock system? I'm not ready to buy the 4" exhaust. Is there any mileage, or HP gained? Should I just wait and do a straight piped 4" exhaust?

I have an 84 Stingray with an OMC sterndrive. It was a good boat for about four years and then I wrecked a ball gear by not putting the drive in the water completly while launching a skier. $600 later I put it back on the water to test only to find out I sucked water into the block somehow and...

i don't see twin cp3's or a turbo....................... yet :ihih: I have big plans, but its that stupid money thing. :mad2: Should I feed the kids and pay the mortage or add stuff to my Dmax?? My next item is replacing the stock exhaust with a turbo back 4" system. My buddy runs a race...

Ok, will I smoke my stock trans if I go to level 4 or 5? This is the hot version of the edge so it will go to 150hp gains.

I guess some good will come out of this, work is going to pay for a spray in bed liner. After a closer look the fork truck driver hit one of the wheel wells while "pushing" the skid in the truck and colapsed one of the corners:wtf:

Teach me how to smoke an import.... All right guys I'd like to join, but I think I need to learn low to make my dually smoke first! I have an edge juice w/attitude installed and set at level 3. The truck has lots of get up and go, but no smoke. Teach me the ways of the force...... I too want...

I think work owes me a spray in bedliner on the corporate card!:cheers2: