Search results

Just got done cleaning and moving some grounds. Perform a IP test according to Heath Diesel, truck is still missing and stalls out. Flash codes found 49, 84 and a 99, talk to Bill at Heath Diesel came to a conclusion that my IP is gone. The stalling only happens when the truck is warm. Now...

Just check fuel pressure at a idle I have 9.5-10 psi at 2000 rpm I have 8.5psi. The fuel filter that i change last week still clean, although I found air in the FFM when I was hooking up the temp fuel gauge.

Have not removed the sock yet, I have my fuel gauge still need to hook it up. Just got back from the parts store with another new filter for the FFM. I change it last week but I want to change it since I have the new set up now.

Well I installed the new walbro pump and filter kit on the truck today. Found out still having the same problem, which is has a miss under a load but when go to neutral it free revs fine. If you try to stay in the throttle the vehicle will die like running out of fuel. When I did the pump and...

I will be getting that stuff, LP by-pass kit, the pump, the FPT and the filter kit. Look for my order with in the next day. I have recieve some parts from you before and had No problems - outstanding job. I got the PMD remote and the Boost bolt from you. Also we had played phone tag a few...

Totally agree Leroy with fuel pressure knowing, but can this be install until i get a fuel pressure guage. Is the pump regulated to a max pressure or is there a adjustment. Also do you sell the senders? I did not see them on your web site. I'm wanting to replace the sender due to erratic...

I do not have a fuel pressure guage set up, just a egt and boost. Do you recommend a fuel press. guage with this set up?

Hello Dieselcash, did you remove your sock from your sender or is it still on? Thanks

Sounds like I need to contact Leroy for an sender and Walbro filter kit, then leave the sock off? Thanks for the response WarWagon.

Well my fuel guage is reading erratic at times and it started to miss under a load, although under a miss i can shift to nuetral and it will go away and free rev with out any problem. I have change the fuel filter and it seem to help but i had to clean the fuel filter canister. The missing...

Thanks for all the input, looks like im going fishing. To bad its not for real fish in the water but for a bad wire. I think I will look for it at all the easy places to get to, then put a circuit breaker in and let the smoke out of the wire. lol I know its not a good thing to do by letting...

Ok here is the latest problem I have been trying to figure out. All of my interior light do not work, as soon as you put a new fuse in, it blows before you can get it all the way in. I have try unplugging dome lights and vanity lights but still blows fuse. With this happing i believe it must...

Welcome to The truck Stop, There is a bunch of good people here who have help me a lot. Looks like you stay busy, stay safe and have a bless day. :hello:

Thanks I will go and check the turbo tube is ok and seated correctly. I will also check the exhaust, I know the filter is ok because I just had it off to clean it since it was time to.

I had one on the intake mounted to a heat sink it lasted a little over a year. I bought mine from Leroy and mounted behind the bumper and is doing great been there since Sept. no problems and install in just about 15 minutes if you are taking your time. Thanks Leroy. David

Yea I thought of that also, but just wanted to make sure nothing can happen with pressure coming thru the turbo when it was missing. Like a bent fin, also when I was removing the injector lines I found both back injectors a little loose. Any known situations with that?

Hello guys, its been a rough past year. Recently I had a rocker arm come loose, found it on the back cylinder of drivers side. The truck started popping through the intake when I was pulling out of the parking lot. Idle the truck across the street and turn it off, towed it to the shop. Back...

Where is the best place to purchase the transgo kit? Oh yea I got my new guages install now also. Thanks for the much needed advise THEFERMANATOR.

Would that be on the drivers side or passenger side?

Ok I got my truck running again, found out it was the reverse band that broke. The ear of the reverse band where the pin goes broke off, everything else look good. Put all new clutches in along with both bands and a new converter. Doing a transmission service every 30k pays off because all...