Search results

thank you all very much.

one more thing. when doing the right side. do i take the sheilds off? it looke like they are held on by 2 bolts? thank you

o.k. i looked at the truck today and the left side looks easy. but how do you do the right the easiest? it looks like maybe through the wheel well. i can even see the far back one at all. and it looks like the 3rd one is behind the down pipe. there is sleeves over the 2nd and 3rd. that are...

i have a 1995 engine code f, i want to replce the glow plugs, with winter coming up. i was thinking ac delco part number 60g. i was wondering is there a faster and hotter glow plug for our g.m. diesel trucks? or what do you think is the best plug for my 1995 6.5? the 60g is about 14.00 a...

well with my 95 with 4.10 gears. it dont make no difference what i do it gets 13.5 stop and go. and 16 on the highway. i put in the 195 stats. taller tires. i even slow down. no difference. i tried all the fuel additives i could find. no difference. but this truck will do what i want...

yes the 6.5 with 4.10 gears and being a 4x4. will get you about 13.5 stop and go. to about 16.2 is the best i got once. ive had the truck for almost a year and a half. power service does not help. 2cycle oil does not help. it does quiet the engine though. after market exhaust and air...

that price was for one. it is 92.00 with tax for both. wow

i need to replace my thermostats. now some parts stores say i can put in gas thermostats. some say you need the special thermostats. the prices are from 7.00 to 45.00. now do i need the crown style or can i use the gas motor ones? the ones i took out are 330-180. the book says they are...

the only way i figured out how to fix it. was to remove the tank and clean it good. it now works good . no light only when its low. like it should. thanks for the reply posts.

thank you guys.

i took the thermostats out and checked them. it has 180's i was wondering is there a way to get the air out. its full of antifreeze. but the low coolant light is on. i drove it down the road. its still on. also is changing to 195,s gonna help or hurt me? i think it has smething to do with...

i checked the resistance. and the right is 2.8 the left totaly zero. now what?

i have a 1995 k-3500 base truck. i wanted cruise. was told all i had to do was put in a fuse and a switch. well i found a switch. it was 178.00. i did not want to take that chance on it not working. plus my truck does not have tilt wheel. so today i went to a salvage yard. and paid a...

i checked the wires on the front ? it looks good. it seems the rear has no sensers on the whole system. no sensers in the whole rear setup, lines are just like a truck without abs. only one wire on each front wheel, so is there a way to check the codes? or is it either its on when...

my 1995 k-3500 abs light is on. why. i went o reilys and the have a ob1 scanner. and it reads abs codes. it says my truck is not responding. it did say my truck was a 1995 so i think it reads my truck. just not the abs codes for some reason. i have an old obd 1 scanner and it has an abs...

o.k. people. what chip will give me the very best fuel saving and a power increase? and im leaning more towards better milage? i have a bd chip. and was told it is very outdated. it is a bd pin 1059. z-bpaa. bxpy 1624. thank you

i took my computer out today and it has a bd blue chip in it. it says pin 1059. then under that, Z-BPAA, then inside it says BXPY 1624. could someone please tell me what this means. is it a tow chip,,,an rv chip, etc.... thank you much

what is the difference between winter and summer fuel ??? real numbers? is it a different blend between the northeast. or midwest or where im at now in southwest kansas? because i went to michigan with a load of household stuff. small fridge, lots of books some tvs. probably a ton...

i checked to see if the stock srw wheels will fit. well the rear is no problem. well the front hits on the caliper. well i have a lot of gm truck parts i collected over the years. so i went in the shed full of rims. and for some reason the wheels from a late 80,s 3/4 ton wont fit...

thanks for all your good information. keep em coming