• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. chevyCowboy

    1996 K2500 runs rough

    i have a 95 that I am working on that has a very touchy throttle as well. I have had it in the garage for a few days for other problems but I did find a broken ground wire so I will take it for a drive tomorrow and see if the broken ground was the problem
  2. chevyCowboy

    No tach 95 3500hd

    After finding this thread i realized that some one replaced the plug to the alternator and the pins where in the wrong place. Took plug apart and moved to correct spot and tach works like it should http://www.thetruckstop.us/forum/index.php?threads/32998/ Sent from my SM-G930V using Tapatalk
  3. chevyCowboy

    No tach 95 3500hd

    The tach does nothing never tries to move from whatbi remember these are ran off the alt i happened to have a spare off a 95 that i tried and it dosent do any thing either. Can i check for a signal voltage coming from the plug on the alt to try and see if i have bad wires or the gauge its self...
  4. chevyCowboy

    95 3500hd no glow Cycle

    Two good batteries seems to have been the missing part to my puzzle. Seems strange that it would crank over but the glows wouldn't work Sent from my SM-G930V using Tapatalk
  5. chevyCowboy

    95 3500hd no glow Cycle

    What's strange is that there is no power to the fuse at all but the fuse is good Sent from my SM-G930V using Tapatalk
  6. chevyCowboy

    95 3500hd no glow Cycle

    The batteries are not very good i will try a different set out of my truck. I didn't use a meter but test light shows voltage at controler Sent from my SM-G930V using Tapatalk
  7. chevyCowboy

    95 3500hd no glow Cycle

    I do but This is obd1. I did flash the codes and had a code for gp circuit relay fault and that is why i changed it Sent from my SM-G930V using Tapatalk
  8. chevyCowboy

    95 3500hd no glow Cycle

    The fuse is good and they are Napa parts. All other fuses are good Sent from my SM-G930V using Tapatalk
  9. chevyCowboy

    95 3500hd no glow Cycle

    Im working on a 95 for a friend that the gp dont cycle as they should. I checked all the gp and replaced 2 that where question able. Replaced coolant temp sensor in crossover, and replaced gp relay, and they still dont work. All grounds seem tight going to try and clean a couple up better. Im...
  10. chevyCowboy

    04 suburban controll issues

    Thanks I'll check that first I know both of the rear ones went bad and I replaced them didnt know you could clean them Sent from my SM-G900V using Tapatalk
  11. chevyCowboy

    04 suburban controll issues

    Our suburban is having some issues it started very intermittent but has gotten worse lately. It has the digital dual zone climate control and sometimes the driver side will blow hot and the passenger will be cold with both set on 60. Today both are blowing hot with it set on 60. I'm thinking...
  12. chevyCowboy

    mirror with comp/temp?

    Where did you get the sensor and I'm guess you sourced the mirror from junk yard Sent from my SM-G900V using Tapatalk
  13. chevyCowboy

    10w-30 for 6.5 in winter

    Do any of you guys run lighter oil in the cold months of the year? never have but need to change oil and was wondering about it
  14. chevyCowboy

    Moving a shop/garage to my house

    Well its been a while since I updated you guys on the project but I got the floor poured back on Halloween and was out of town the next weekend but this last weekend I got the sheeting all replaced and the windows that Im not going to have sheeted over, I found a used 8x18 garage door on...
  15. chevyCowboy

    Lightning my leaf springs

    I never did anything with this proiject as my current garage project has been occupying my time, but at some point I will get back to it
  16. chevyCowboy

    Moving a shop/garage to my house

    I have rubber expasion joint to go between the wall and floor
  17. chevyCowboy

    Moving a shop/garage to my house

    Sorry haven't been able to post for a while but last Saturday we got the building moved in and set on the walls and anchored down. wasn't able to get much done this weekend due to my daughters first birthday party, but did get the dirt work done and the sub grade set. need to get a few more...
  18. chevyCowboy

    Moving a shop/garage to my house

    Well I'm using wedge anchors because I thought trying to set the building down onto bolts would be way too difficult
  19. chevyCowboy

    Moving a shop/garage to my house

    Well after another busy week and weekend I have footings and block walls. Unfortunately I have hit my "goal" budget already, let's be honest It was a dream really, but unless something completely unexpected happens I'll be within my max budget all that is left is to pour floor and but garage...
Back
Top