Search results

Predator on 120. I don't run it hard as there isn't anywhere to beat on it here ... and there are too many police here to.

As most of you guys know these trucks have verious rattles inside. Mine has a couple. The one I not sur how to fix is the passenger side airbag cover. It is vibrating at the lwer left side and I can push it and the noise goes away. I only notice it whe the truck is stopped and in gear. Anyone...

Thanks Pepp. With Ike on the way I will probably be towing soon. :(

When towing does the rear of the truck squat more with the Sulastics? I haven't towed my TT since the Sulastic install.

I'd like to hear the answer to this also.

Those are some very good numbers. The stock numbers seem high but if so you got a good one from the factory. I really didn't think the Predator would put out those good of numbers. I guess I need to find a dyno for mine as I've been running the 120 setting for a while now and see how mine...

I will measure them and get back to you. I won't be able to remove them for a couple of weeks as I'll be away at work.

Maybe I have a set of the long ones. My truck is stock height and the sleeves go all the way to the boots with no room for adjustment if the tierods need to be turned in.

Sounds like a good idea. I may have to shorten mine too.

There isn't any dye in Jet A. It is a different color than ulsd though. It is straw color. I mix 2 cycle oil at 16 oz to about 20 gal of Jet with a dose of Power Service too. My truck runs fine like this. I would think that Jet A would be more refined than ulsd and with lube it would be about...

The only problem I had with mine was the one I installed on the driver side didn't want to thread on but about half way. I had to put a pair of vice grips on the rod then screw on the sleeve with a wrench. The threads didn't look bad and I lubed them with anti-size. Tonight I drove down a...

I installed my tie rod sleeves I got from GmcLbz at Upstate Diesel Performance the other day. I used the diy post from McRat as a guide and for the most part it was pretty easy. Now that I have the sleeves on I noticed my steering wheel isn't centered as well as before. I was careful and...

I have a buddy with a '07 6.7 cummins with the dpf and is wanting to run some of the Jet A fuel I can get. He is concerned about it causing problems with the dpf. I would think he would be ok with some added lubrication. Anyone have any info on any possible problems?

I've got a set on order too, along with a set of drop schackles. I'm ready for a smoother ride.:driving:

I'd like to join too! :biggrin5: Member list: #1 WhtTndr3 #2 mytmousemalibu #3 MattZ71 #4 Louisianarebel #5 WhitetailAddict #6 michael nelson #7 big block 88 #8 12ga diesel #9 Trotorx2 Copy this and paste in your post and add your name and number. Please drag the instructions with...

I'm sure you will like yours. Mine works good,fit good and so far no codes.

I'm wanting a set too but have been waiting to see what was in the June specials. I'm wondering how they will work with drop shackles?

Nick Is your Predator the U7186? If it is where did you find how to check the balance rates? I can't find them on mine. I really like this programmer but do not get the mileage you get. My truck stays in the 17mpg range and I run empty all the time.

When ya coming thru? I'll be in Galveston another week if ya want to stop by, maybe go get something to eat at Hooters on the seawall.

Close, I'm in Beaumont. If I remember Phil moved up northwest of me around Palestine.