Search results

Just went on website and price is $14.09 I would print and save for next store vist b/c they usaully price match. Or if u want to one up, I've went to a diffrent filter set up where the replacements will be $6.50 a pop (5-6 mic napa brand, 9'' spin on)

just sharin some info- take or leave it. a sensor could be built to the wrong specs if not oem - hence I had the joy of switching out my OPS 2x (I know its not the same as a crank sensor) thats why i related the tip

TAHOE-Lower Ball Joint Is the lower ball joint, on a tahoe, a press in type?

Lesoned learned from OPS - AC DELCO!! Check rockauto.com $20 less than stealer for me.

Thanks for the info TT. Do u know if the lower ball joints are Press-In type, just double checking.

TurboTahoe- nice 2DR, its very clean. Do u have the part number or dimensions on the shocks? And do the hellwig sway bars make a big diffrence?

I'm trying to piece to a simple lift kit probally 2'' mabey 3''; torsion keys, add-a-leafs, and 4 new shocks( longer in rear)...so u wont have to worry about all that and it would be a suspension lift.

I'm facing the facts that I need a new front end b/c : 1- I have 317Kmi on the tahoe and 2- The alignment shop would not do the alignment 30Kmi ago , also vibration has got excessively worse( i cruise @80mph often). Just figure I'd heed Turbine Doc warning and change the bearing assembly...

Poor Mans Lift ?s Anyone ever use Pro Comps 4dr Tahoe lift 51095B?? Whats stoppin me for a 2Dr use?? What would be a longer shock to make a "add-a-leaf" kit work?? My tahoe sits 1'' lower in rear.

problem solved- 2nd HPHose replaced! Parked the tahoe on a different angle and found the leak on the other High Pressure line that had not been replaced- wierd that it didn't leak when on. Then I saw a drip of coolant - diesel gods tellin me something - can of leak stop nipped it in the...

could u be more specific b/c I've got the same problem?? Location? Fix?

wish i knew!! (j/k) The area is twoward the front drivers side, and it starts off from the plastic skid plate, i think then spreads.(driveway has slight incline)

I ve got a leak of power steering fluid that only happens when I shut my truck off- any one w/ simarly problem?? :mad2: There are no leaks when truck is on or when pressing brake. Ive rebuilt the hydro-boost; replaced a leaky high pressure power steering line; and searched high & low. Thanks...

Problem Solved Got a new OPS and installed with new 92' LP and now gauge shows 7psi @idle. (also Oil Pressure went to the normal range 40-60) The funny thing was that my autometer fuel pressure gauge took a dump too. Buy AC Delco= Less Headaches THANKS ALL:grouphug: for the help to keep...

Did the jump from batt-pin G. And it does not run with the NEW Lift Pump plugged in.

OPS was replaced, not AC Delco.

Yes it does not run when engine is running.

I just triple checked the new Lift Pump and with it plugged in the harness while i was holding it in my hand- the new LP turned on only during the cranking period.

Need help please. Just went to insall a new LP b/c mine was on way out, then it died recently- (0) pressure on mechanial gauge. Before undoing pluming I plugged in the new Lift Pump and it started the engine and LP started for a second then stopped. The OPS was replaced 4 months ago, or...

Got Mag Today And No 300hp 6.5!!! I'm very disapointed and highly pissed of with Diesel Power Mag, there was no mention of this ''300 hp 6.5TD". Please someone link the article. sick of reading about 1200hp cummins or stacked LLY-Z-X-C --kiss my 6.5!!:mad2: