I'm working on a 1990 chevy for a friend, It has the electric heater control head, the screen on it shows one of the little arrows on it but that is all, so it does have power, but none of the controls on it do anything, and the blower motor in the truck is constantly on, I'd say somewhere...
Just want to throw this out there, but on my gm-8 the boost controler I made is very touchy with the temp changes. Between hot summer air and cool winter air I always have to adjust mine..... does anyone else experience this.... I don't want to put on a new charger and be dealing with a damn...
in the truck in my sig, I made a turbo master when the air pump let go, the way its set up, isn't the best for fuel efficency but it works, at cruising speed it runs about 4-5psi, it maxes out at about 10-11psi when you stomp on it, but when I pull a trailer up a long grade it will gradually...
I think the gm-8 is way too small on the exhust side, i have one and i'll never put one on again, my egts run too hot, and i have a stock computer, as far as heath and the ATT, i think he sells good products, but i belive if your going to runn an ATT you should run the tune for it, which is the...
I didn't like all that oil and junk goin back through my turbo and into my engine either, my cdr is still in the valve cover with a hose that takes it near the drivers tire, I can notice blow by sometimes, but never have any oil drips of any kind.
well bit the bullet and ordered a set today, just got the standard manual type, i decided i didn't want to deal with wiring, it was cheaper, and i never move my mirrors once set anyways