Recent content by Goldhawg

Dayton Ohio area

I was hoping to go with the NNBS caliper and rotor and mount to the NBS spindle. Is that not possible?

Sounds like I got a paperweight for my 2hrs of labor plus cash. Any market for these? And does this mean that for my 99 Tahoe, any of the 6 lug NBS spindles will work if they have 4WD?

I may have missed it in the various threads, but can I replace the 8 bolt hub with a 6bolt hub to fit my 2019 wheels? I picked up the spindles of a 2500 4WD yesterday at the pick and pull, but I would need to replace the hubs.

Heading to the pick an pull tomorrow; there are a couple of 01-07 2500HDs. What tools are necessary to get these hubs out? What all should I make sure and get (doing the NNBS calipers/rotors so won't mess w/that).

I didn't try the outer 1500 pad, but the inner 1500 pad doesn't fit with the metal prongs that keep it in place in the piston, due to the larger piston diameter. I suppose one could bend those prongs but I just went out and bought the police pads. The inner (that goes in the piston) then was...

I have a 99 2dr 4WD Tahoe that had the mushy brake pedal so I decided to do the NBS MC upgrade and the police Tahoe caliper swap per this post. I have 6 lug wheels. The police caliper does fit the bracket (almost) but I had two problems which I'll try to describe since I didn't take pics...