Just wanted to let anyone who is interested that the new Heath Economizer Propane system is ready to go. This new system is set to gain up to 50 rwhp and improve fuel economy up to 7 to 8 mpg. I have been running the system on my 95 6.5L for 4 months and used it during my dyno pull at US Diesel...
We did 153 today and the guys are on there way home. Thanks to everyone who supported us in this project. I had my guys do some video, so I will be putting together a DVD that we will have available on the site once I get it done.
Regards,
Ian Carver
The truck was featured in volume 2 issue 3 of Diesel Tech this year. Not sure if it is still available but I do have a PDF file of the article if anyone wants it.
For those of you who have been waiting for a 6.5 to grace the pages of Diesel Power magazine your wait up. Breaking the 300 HP mark at the US Diesel Parts Dyno event has finally inspired Diesel Power to do an article on the truck that will be available next month. I hope it makes a good read...
For those of you waiting for the new intake system you shouldn't have to wait much longer. I have the prototype installed on my truck and it works very well. I have to make a few small changes and after that we should have a very nice system available. I can't give any temp or CFM specs as of...
We are actually running the AirDog system instead of the F.A.S.S. The truck is being loaded up this weekend and heads out on Monday. We will be making a video of the entire run that I hope to have available some time in late October. Thanks for the support.
Regards,
Ian Carver & the Heath...
You stud you! Going to the track for the first time this friday, to bad you don't live closer. It would be a fun night. Some day we should try and put together an all 6.5 drag race/show & shine event.
Ian
I did a lot of testing with the Duraterms against the 60G plugs, what I found was the 60G plugs got about 200 degrees hotter but couldn't last as longer under the high load conditions we put them under. When I ran the Duraterms I left them on the battery for 6 hours and they maintained a...
We are working very hard in order to get this truck done in time for the event in August. Like Tim said there is a full write up in the next issue of MaxxTorque that should answer all of your questions. Eventually I would like to have all the build up pictures available on our site so you can...