Recent content by bdemutis

I just got a new truck to me it's from California I live in pa so I want to keep it rust free. I want to know the best prevention should I just mix some oil and diesel and spray her every once in awhile or should I undercoat it? Or should I spray it with chassis paint and oil coat it?

here's a video of her running I mean I don't know what a healthy 6.5 sounds like also the gunk in my cdr is condensation I light it on fire it sizzles.

So make sure there all tight and dry hell I'll just get the new injectors I know they probably just hit 100k or more lol.

I wonder of my injectors are leaking into the cylinder

Ok so the wait to start stayed on 7 seconds the truck took a few cranks to fire up two key turns. So I'll prime it before I leave work in drive and see if she fires better I also checked the filter housing it's not leaking anymore and I checked in the valley around the filter it dosnt appear to...

Yes the pmd is securely mounted under the bumper on a heat sink. I'm in pa so I guess you can say I'm in salt country. Most the time I thought if the fuel bowl was leaking it would run down the back of the motor and drip all over the ground or trans.

I let it sit usually fir two days over the weekend and she fires up that's what confuses me like today when I left for work fired right up leaving work she fought me maybe it's the pmd but I'd hate to change it with my new one maybe the pmd cable I heard they can go bad because I was having a...

Ac delco glow plugs all 8 brand new. Glow plug cycle time I want to say it seems like the light stays on for a minute it feels like I'll time it tomorrow.

Do you really need the heater or can I bypass it and I felt around the filter haven't had any more leaking and if the filter was leaking would it cause hard staring honestly it just randomly started. Also is there a rebuild kit for it?

Brand new glow plugs I still haven't did the clear fuel line yet I havent even looked were to put the clear line yet I did change the filter because it was leaking a bit. I have no idea where it could be weeping.

My truck I noticed is harder starting in the morning or after it sits. It dosnt always do this but sometimes. Anyway went to leave work after truck sat glow plugs cycle truck fires up and stalled then cranked and cranked gave it throttle and it roared to life allot of white smoke smells like...

I'll probably get the injector socket or a crows foot because if I break it um going to freak.

None of my friends have diesels and my gfs truck is a 7.3 and so is her dad's but 7.3 injectors are a cake walk there's room in the bay. What size socket is it.

If I put the cap and crimp on how would I get the socket on it with the line of anf what about using a compression clamp.

Lol I think the installation kit I'm getting only had two crimps so I'm guessing it's push on and the turbo gasket from a 88 ford thunder coup should work as I recall seeing before.