6.2 parts for sale

[ShawnR]

I am selling the leftover parts from a remanufactured 6.2 crate motor.

Everything is in central ohio, but I would be willing to ship if required.

http://columbus.craigslist.org/pts/998193776.html

 

[mattthebrat]

Would you be willing to sell just the exhaust manifolds? Those are the military ones correct? Shoot me a PM if you want.

 

[jrsavoie]

What condition is the IP in? I swapped my 6.2 for a 6.5 crate replacement engine in 2000. Will that pump work on my truck?

 

[ShawnR]

What condition is the IP in? I swapped my 6.2 for a 6.5 crate replacement engine in 2000. Will that pump work on my truck?

It came on a "reconditioned" motor, whatever that means. I would assume that it has been rebuilt, but I can't be positive.

I thought that the 6.2 pump didn't put out as much fuel as the 6.5 pump. Not positive, but that is what I understood.

 

[jrsavoie]

It came on a "reconditioned" motor, whatever that means. I would assume that it has been rebuilt, but I can't be positive.

I thought that the 6.2 pump didn't put out as much fuel as the 6.5 pump. Not positive, but that is what I understood.

I think we need some expert advice here.

 

[ShawnR]

I think we need some expert advice here.

Give these a read, it is all that I have found so far.

http://www.dieselplace.com/forum/showthread.php?t=126223

http://forums.dieselpowermag.com/70/6757115/gm-62-65/62-inj-pmp-vs-65-inj-pmp/index.html

Probably would be best to just put the question out on the 6.5 forum. Might need injector lines too, but I have those as well. My 6.2 apperantly came with 6.5 heads and injector lines.

 

[grigsby]

ShawnR, I need a fuel heater rod that goes in my 90 GMC 6.2.
Or do you know resistance of a working one? I may can find one and would like to check it to see if it were right resistance.
I suspect any thing but -0pen- I think, resistance would be right? I have had this GMC for 3-4 years and I 'm learning slowly all these things. How does engine start without fuel pump under floor working? Me and this truck is going round and round. thanks grigsby --1981 Iveco flatbed 5 cylinder, --2 1986 VW 1600 Jetta. --1990 GMC 6.2.

 

[jrsavoie]

How does engine start without fuel pump under floor working? Me and this truck is going round and round. thanks grigsby --1981 Iveco flatbed 5 cylinder, --2 1986 VW 1600 Jetta. --1990 GMC 6.2.

The injector pump will most often suck fuel through a non working lift pump

I got a message that you tried to message me but my box was full. I made some room so message away

 

[grigsby]

ShawnR, I need a fuel heater rod that goes in my 90 GMC 6.2.
Or do you know resistance of a working one? I may can find one and would like to check it to see if it were right resistance.
I suspect any thing but -0pen- I think, resistance would be right? I have had this GMC for 3-4 years and I 'm learning slowly all these things. How does engine start without fuel pump under floor working? This truck and I are going round and round. thanks grigsby --1981 Iveco flatbed 5 cylinder Diesel, --2 1986 VW 1600 Diesel Jetta. --1990 GMC 6.2 Diesel.

 

[sfracer]

still have parts?