Cumminalong
Doghouse Diesel Performance
Okay, first I have to say that I had no intentions of running tonight. But after a little while of watching everything and then Eric wanting to run his truck, I decided to put 'er on the track.
The truck ran SUPERB. It has never sounded, felt, or ran this well before. It was perfectly content running up to 4K RPM....never missed a beat.
It did exactly what I wanted, had a light haze at wide open throttle. EGT's were perfect, peaked at 1289. As you can see, the twins and the 160's are working perfectly together.
:thumbsup:
I was running the TNT/R tune only, Edge was turned off. This was the first time I got to run it wide open, so I only wanted to see what the Smarty would do.
7.95 on the 1/8 translates to about 12.4 on the 1/4.
:coal:
Wait until you see the second clip where the local 'tards didn't want to move away from the burnout box....):h
http://www.youtube.com/watch?v=1SCQhbv-xv0
The truck ran SUPERB. It has never sounded, felt, or ran this well before. It was perfectly content running up to 4K RPM....never missed a beat.
It did exactly what I wanted, had a light haze at wide open throttle. EGT's were perfect, peaked at 1289. As you can see, the twins and the 160's are working perfectly together.
:thumbsup:
I was running the TNT/R tune only, Edge was turned off. This was the first time I got to run it wide open, so I only wanted to see what the Smarty would do.
7.95 on the 1/8 translates to about 12.4 on the 1/4.
:coal:
Wait until you see the second clip where the local 'tards didn't want to move away from the burnout box....):h

http://www.youtube.com/watch?v=1SCQhbv-xv0