Upper Oil Pan Removal

[ripmf666]

Service Information
<FORM onsubmit="JavaScript: return true;" method=post name=CellHandlerForm action=/si/cellHandler.do>Document ID: 725179 <HR>

Upper Oil Pan Removal
Tools Required

J 37228 Seal Cutter

1. 
   
   
   
   
   <LI type=1>Remove the oil level indicator tube bracket bolt. <LI type=1>Remove the oil level indicator tube.
   
   
   
   
   <LI type=1>Remove the two oil pan to flywheel housing bolts (denoted by black triangles).
   
   
   
   
   <LI type=1>Remove the 24 upper oil pan bolts using a long bit 6 mm hex driver. <LI type=1>Seperate the upper oil pan from the engine block using J 37228 .
2. Remove the upper oil pan.

© 2010 General Motors. All rights reserved.
</FORM>