• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

PureFlow Rep and Tech

P

PureFlowTech

New Member
Messages
0
Reaction score
0
Hey just wanted to drop a line and let everyone know that I am happy to answer any questions that anyone may have regarding products made by Pure Flow Technologies. We are the manufacturer for the AirDog Fuel Preporators and Raptor Fuel Pumps. We also make an air seperation system for class 8 trucks.

Please do not hesitate to contact me with any questions that you may have.

Also do not forget about our holiday special. AirDog 100 and 150 units are on sale for a very limited time for a MAP of $499.00.

Thank you

Ron
 
Welcome Ron.

We're glad to have you here. :)
 
good to have you hear.

I love my Air Dog so far, but if it fails I know who to blame:D
 
Thanks for the warm welcome guys. I am new to the forums, so bear with me for a while, and I will get the hang of how all of this works. I look forward to being an active member, and I am happy to help with any questions anyone may have about PureFlow Technologies and our products.

Thanks again,

Ron
 
durallymax said:
good to have you hear.

I love my Air Dog so far, but if it fails I know who to blame:D
Click to expand...


Glad to hear that you are happy with your system. One thing that you will find if your units does give problems down the road, is that our customer service is second to none. The AirDog system is designed to run for several 100,000 miles, so I would not worry too much.

Thanks,

Ron
 
welcome mate.

i actually do have a question. i have mine installed where is was supposed to go on the dmax. i have the feed to the pump coming from the vent side of the sender in the tank as i already had this setup for my other filter prior to the ad. when the pump is running it sounds like it is cavitating, or like air is present in it. not a nice constant buzz. is it the fuel/air seperation or the return to the filler neck that causes this noise?
 
You must log in or register to reply here.
Back
Top