tanman_2006
Just a farm kid...
Dont blame you. I waited quite a while before I got FD's
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
New and need sugestions/help
- Thread starter coopin87
- Start date
NVW
Well-Known Member
To save some money in the short term the 3 1/2" exhaust will suffice, you can do your own alignment, I just did with this thread. http://www.thetruckstop.us/forum/sh...a-GMT400-(or-any-vehicle)&highlight=alignment
What brand name is on the injectors? Some of SS diesels parts are OK.
Almost forgot, Welcome to TTS
What brand name is on the injectors? Some of SS diesels parts are OK.
Almost forgot, Welcome to TTS
coopin87
New Member
Not sure on the brand But they are in the box that came from ssd only markings on them (just opened it up) are M-311 are these ok or should I look at getting something different?
This is what i believe I have http://www.ssdieselsupply.com/products.html?pid=269&PHPSESSID=59b8e727eb685aa9aaa5efa09554fcc5
Also I just ordered a new DE turbo back exhaust for $230 and a 2.5" mandrel bent crossover (with all new mounting hardward and gaskets) for $86 along with Harmonic Balancer and pulley fuel filter and the bosh glow plugs.
NVW
Well-Known Member
I would try them as you have them already.
Just a heads up, you can't link to a non supporting vendor.
Just a heads up, you can't link to a non supporting vendor.
Jorge6.5
Well-Known Member
Have the injectors pop tested before you install. Make sure they are within 5% of each other and have them set at least 2200psi