• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Looking for a scrap GM engine block to use as a template to weld a 4L80E transmission

jrsavoie

Recruit
Messages
9,641
Reaction score
8,255
Location
Rural Clifton, Illinois
Looking for a scrap GM engine block to use as a template to weld a 4L80E transmission. Must have the top center hole. Most any newer block will work. From a 6.2 diesel to a small block. As long as it has the top center hole for the transmission
Near L'Erable, Illinois South of Kankakee about 15 miles south of the south side.
Also looking for the bolts to mount the trans with.
 
Hit up a local machine shop. I bet they have a bunch of useless cores they'd sell for scrap.
 
Back
Top