• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

help

truckie481

truckie481

Dagum
Messages
682
Reaction score
0
Location
Cleveland, NY
I need some help with tie rods, mine are shot and I want to upgrade to the Cognito HD's but I have been told they will rub if I don't have a lift. I'm running 285 75R16s with no lift at present. What do I need to do on a budget to install the cognito's?
 
No Lift needed. Just put them on. Pep has them on his truck '01 with no lift and he's lowered it a few times, on the bump stops, for drag racing. I'm sure he'll post up when he finishing cooking. ):h
 
^^^What he said^^^

I don't have an issue with mine rubbing at all...They are pretty beefy and I've had my Tbars cranked, lowered and in between all the while doing boosted launches and giving em' hell in the 1/4mi...I run 265/75/16's on the stock PYO's

I used to run 285's but when they wore out I went with the 265's cause I could get a load range E...

I see you are running aftermarket wheels...just make sure the offset (if not stock) will not affect the rim to tie rod end clearance...

It wouldn't hurt to talk with NorCal Nick to be safe though...
 
You must log in or register to reply here.
Back
Top