• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Happy B-Day 2 Me!!

D

dur0maxx

Is Blowin Soot On A Prius
Messages
159
Reaction score
0
Location
Charleston, SC
Finally Bought Some Gauges

Last night I bought some VDO gauges as a present to myself. I'm finally gonna know how much boost i'm running with this TM. Anybody have any tips on how to install a pre-turbo pyro without removing the turbo. I've read that you can leave the truck running and drill it that way. Just wondering if there is anything to watch out for. This is not my first gauge install but I have never installed a pyro before.
 
Last edited:
I'd watch out for flying shavings if you drill it while its running. Wear safety goggles minimum or maybe even better one of those full face shields. When you cut it off and start tapping the hole, put some bearing grease on the tap so the shavings will stick to the tap. Be careful.
 
You must log in or register to reply here.
Back
Top